Gaskets

Innovative Fluid Sealing

We are delighted to announce that we have been appointed the official UK agents for Triangle Fluid Controls Ltd.

Triangle Fluid Controls Ltd are a market driven, technology based company serving customer worldwide with innovative sealing products. They manufacture and distribute filled-PTFE, compressed non-asbestos sheets/gaskets and semi-metallic gaskets. Our commitment to quality and service ensures that our customers receive high quality products in the shortest lead time possible. TFC offers design, engineering, technical and sales support, to both end users and distributors.

All of their products are tested throughout the manufacturing process by their onsite laboratory staff to provide consistency and traceability to our/their customers. This also applies to our line of metallic gaskets. All of these product lines are marketed under the Durlon® brand name..

Durlon® Sealing Products have the widest possible range of service applications, therefore, the number of gaskets required to be inventoried can be greatly reduced. This impacts process safety because limiting the number of gasket styles reduces the change of installing the wrong gasket in the wrong service. For these reasons more and more original manufacturers and industrial consumers are specifying Durlon® gasket materials for their needs.

Service & Cost Savings

  • Unsurpassed seal ability drastically lowers emission levels
  • General purpose sheet out performs traditional economy sheets
  • Anti-stick coating reduces time spent removing gaskets
  • Good compressibility and recovery maintains tight seal
Sustainability Gaskets

Our Sealing Products

Durlon® 7900/7925/7950

  • General purpose sheet containing high-strength aramid fibres bonded with high-grade nitrile (NBR) rubber
  • Commercial grade gasket with anti-stick coating that cuts easily and cleanly for improved handling

Durlon® 7910

  • Contains high-strength aramid fibres bonded with high grade nitrile (NBR) rubber
  • Specifically developed to meet the requirement of NSF/ANSI 61 for potable water applications at 23°C

Durlon® 8300 Carbon/NBR

  • Multi-service, high strength carbon fibre and NBR gasket sheet suitable for a broad range of chemical and thermal services
  • Can be exposed to extreme pressure and temperatures
  • Excellent sealability during thermal cycling

Durlon® 8400 Phenolic/NBR

  • Outstanding material designed for higher temperature and pH applications
  • Provides widest range of chemical resistance of any non-asbestos-free material
  • Excellent torque retention to maintain Cathodic Protection (CP)

Durlon® 8500 Aramid-Inorganic/NBR

  • Contains blend of high strength aramid and inorganic fibres
  • General purpose applications
  • Surpassed the API 607 fire test
  • HVAC service fitness tested and compatible with modern refrigerants

Durlon® 8600 Aramid-Inorganic/SBR

  • Unique blend of high strength aramid and inorganic fibres with SBR binder
  • White gasket material

Durlon® 8700 Aramid-Inorganic/CR

  • Contains high-strength aramid and inorganic fibres bonded with high grade neoprene (CR) rubber
  • Excellent resistance to ozone oils, non-aromatic solvents and various refrigerants
  • Top performer for original style HVAC OEM applications.

Durlon® 9000/9000N Inorganic/PTFE

  • Approved for liquid chlorine, caustics, liquid oxygen, and high purity applications; USP Class VI Certified, DNV-GL Certified, ABS-PDA Certified, Complied with (EC) 1935/2004 & (EU) 10/2011, Pamphlet 95 Ed 3, conforms to FDA requirements of 21 CFR 177.1550
  • Various shapes of inorganic fillers blended with pure PTFE resins
  • Certified (BAM) for oxygen service up to 52 bar (754 psi) and 260°C

Durlon® 9200 Barium Sulfate/PTFE

  • Barium Sulfate filler blended with pure PTFE resin.
  • Suitable for hydrofluoric acid service.
  • BAM tested and certified for gaseous oxygen at pressures up to 52 bar and 260°C.
  • Conforms to the requirements of 21 CFR 177.1550.

Durlon® 9400 Carbon/PTFE

  • Pure PTFE resin combined with carbon filler homogeneously dispersed throughout the compound.
  • Developed for use in hydrofluoric acid and anhydrous hydrogen fluoride (AHF).
  • Demonstrates good electrical conducting properties where flange electrical continuity is required.

Durlon® 9600 Expanded PTFE

  • Made from pure PTFE resin that offers compressibility up to 60% and is resistant to highly aggressive chemicals.
  • Suitable for use in steel flanges and flanges with irregular surfaces.
  • Unique expanding process creates a high degree of fibrillation with nearly uniform strength in all directions minimising cold flow and creep while maximising performance stability and reliability.
  • Conforms to FDA requirements of 21 CFR 177.1550.

Durlon® Joint Sealant

  • Made with only 100% pure PTFE resins.
  • Supplied on spools it comes in various thicknesses with adhesive backing to ease in installation and is ideal for worn flanges of all sizes.
  • Conforms to FDA requirements of 21 CFR 177.1550.

RCA (Reduced Contact Area)

  • Replaces standard full face gaskets in FRP, PVC and other non-metallic and metallic pipe flanges where a low stress gasket is required.
  • Configuration reduces the total gasket contact area resulting in a lower seating stress at a given torque level, while preventing flange location.
  • Available materials: 1/16” and 1/8” Durlon® PTFE styles and 1/16” compressed asbestos free styles.

Durlon® Flexible Graphite

  • Available in a homogeneous, laminated and tanged styles with various thickness stainless cores.
  • Unaffected by heat over a large range of temperatures.
  • Exhibits low electrical resistivity and high thermal conductivity and is suitable for cryogenic temperatures.

Durlon® HT1000 (Ultimate Mica Technology)

  • Phlogopite mica paper impregnated with an inorganic binder
  • Superior weight retention: less than 4% weight loss at 800°C, and extreme temperature sealing performance up to 1,000°C.
  • Flexible, elastic, has a high tensile strength, can withstand substantial mechanical pressure perpendicular to the lamellar plane, chemically resistant, fireproof, infusible, incombustible, and is a known non-toxic alternative to asbestos.
  • Available styles: S90,L316,T316

Durlon® ETG Gaskets

  • Engineered to provide the preeminent solutions to sealing gasketed joints exposed to high temperatures, typically greater than 650°C and up to 1,000°C.
  • Oxidation boundary material combined with flexible graphite to preserve seal integrity and retain the initial assembly torque.
  • Sealing industry’s best available technology for effectively sealing extreme temperature applications.
  • Available styles: Spiral Wound, Durtec®,Kammprofile.

Corrugated Durlon® CFG (Corrugated Metal Core)

  • Fire safe and blowout resistant, the corrugated, flexible graphite material is designed for severe service conditions.
  • Seals imperfect flanges with no inward buckling.
  • One standard thickness 3/32” (2.38 mm).
  • Standard ANSI Class 150 & 300 ring gaskets: ½”-24”

Spiral Wound Gaskets

  • Made with an alternating combination of a preformed engineered metal strip and a more compressible filler.
  • Strip metallurgy and filler material combinations can be selected to seal virtually any application.
  • Manufactured according to ASME B16.20 standards.
  • Available styles: D, DR, DRI.

Kammprofile Gaskets

  • Solid metal core gasket with machined grooves that provides reduced contact area and when combined with the soft conformable sealing layers.
  • Improved performance at low seating stresses and excellent resistance to blowout.

Durlon® Durtec® (Premium Corrugated Metal Core)

  • Virtually uncrushable design makes it ideal for tough to seal cyclical pressure and temperature applications under low bolt loads.
  • Designed to withstand high temperatures and pressures.
  • Fire Safe – SS316L/Graphite passed modified API 607 fire test.
  • Core may be refaced and reused.

RTJ (Ring Type Joint) Gaskets

  • Precision machined from solid metal and designed for high pressure and temperature as well as aggressive chemicals.
  • Traceable and material hardness is carefully controlled to ensure a good seal without damaging the surfaces of the flange.
  • ASME B16.20 standard and the API spec 6A.
  • Available in styles R,RX, BX